Motion Computing LE-Series Instruction Manual download pdf (Page 70)

100

60 Motion Computing LE-Series and LS-Series Tablet PCs User Guide

• Even with the Narrow Angle setting, if a sound is loud enough and within the

angle of acceptance (no matter how distant), the sound will be picked up by the

microphones. The advantage of the Tablet PC is that it detects fewer

extraneous sounds than other audio systems. You can further limit the

detection of these outside sounds by turning down the microphone volume and

speaking louder; this reduces the microphones’ range and restricts the

capability to detect extraneous sounds.

• The Tablet PC contains pre-installed audio components. If you install a third-

party audio device (such as USB or Bluetooth devices), the Motion-installed

audio may not work. If this happens, you must reinstall the Motion-audio

components. (The Motion audio components are the SigmaTel and Knowles

Acoustics audio drivers.) After you install these, if you still have problems

recording, contact Motion Technical Support or the Bluetooth or USB

manufacturer’s technical support.

• To improve speech recognition, run additional speech training sessions. Open

the Windows Control Panel and select Speech to perform additional speech

training. As you do this, speech recognition accuracy will gradually improve.

PORTS AND

SLOTS

PC Cards (LE-Series)

The PC Card Slot, also referred to as a PCMCIA Card Slot, holds one Type-II PC

Card for networking, memory expansion, or accessory connection.

1. To install a PC Card, insert it label side up.

2. To remove a PC Card, push the button next to the slot until it pops out.

3. Push it again to eject the PC Card.

NOTE: Your Tablet PC ships with a plastic blank card in the PC Card

slot. When the slot is not in use, we recommend that you leave the

plastic blank in place.

Secure Digital (SD) Cards

The SD Card Slot holds one SD Card for networking, memory expansion, or

accessory connection.

1. To install an SD Card, insert it in the slot, label side up.

2. To remove the SD Card, grip the edge of the card and carefully pull it from

the slot. Notice that the edge of the Tablet PC is curved slightly in the area

of the SD Card. This makes it easier to grip the edge of the card for inser-

tion and removal.

Infrared (IrDA) Port

The IrDA port uses the infrared connection protocol to transfer data or digital

images from any IrDA enabled device to a specified file location on another IrDA

equipped device. Typically, the devices must be within three feet of each other.

Refer to the “Using Infrared Wireless Connections” on page 70 for more

information.

USB Ports

There are two high speed USB ports on the Tablet PC that can be used to attach

any USB device to the Tablet PC. Typically a USB device draws power from the

Tablet PC, therefore it is advisable to use AC power whenever USB devices are

attached. Running USB devices while operating on battery power will adversely

affect your rate of power consumption.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 99 100

Comments to this Manuals

No comments

Motion Computing LE-Series Instruction Manual Page 70

Comments to this Manuals

Related products and manuals for Graphic tablets Motion Computing LE-Series